Open Jobs

Walbridge Traveling Electrical Crew, Electrical Apprentice Pay: $22.00/hr, Per Diem: $100/day Overview Traveling role supporting electrical crews on active commercial and industrial builds. You will work under supervision, learn safe installation practices, and contribute to daily production targets. What you will do - Assist with conduit bending, supports, and basic rough in - Pull and label wire, stage material, maintain organized work areas - Support device installs and terminations under direction - Participate in daily safety huddles and follow site rules including LOTO Travel details - Assignment based travel, report to jobsite consistently - Per diem paid per day worked to offset lodging and meals Work style Fast pace, high safety standards, clean workmanship, and strong communication.

Rigging Foreman to lead crew in Cincinnati. Supervise rigging crew and coordinate all lifting activities on site. Plan lifts and develop rigging plans for complex equipment moves. Calculate load weights and specify rigging requirements. Coordinate crane positioning and ground preparation. Lead pre-lift meetings and communicate plans to all personnel. Ensure proper rigging inspection and documentation practices. Manage rigging equipment inventory and maintenance. Interface with crane operators on lift sequences and priorities. Enforce exclusion zones and stop work for unsafe conditions. Track productivity and report progress to supervision daily. Must have rigging foreman experience on industrial projects. Schedule is 6 days per week with 10 hour shifts. Foreman rates with full per diem.

Signalperson for crane operations in Lexington. Provide signal person services for crane operations on industrial site. Maintain visual contact with crane operator throughout lift operations. Use standard hand signals to direct crane movements precisely. Position yourself safely while maintaining clear line of sight. Coordinate with riggers on load attachment and positioning. Clear personnel from swing radius and load travel path. Monitor overhead clearances and warn of potential obstructions. Stop operations immediately for any unsafe conditions observed. Communicate via radio when hand signals are not practical. Document signal activities and participate in lift planning. Must be qualified signal person with industrial construction experience. Schedule is 5 days per week with 10 hour shifts. Per diem provided.

Rigger for industrial construction in Louisville. Perform rigging activities for industrial equipment and material handling. Select appropriate slings, shackles, and rigging hardware for loads. Calculate load weights and determine proper rigging configurations. Inspect rigging equipment daily and remove damaged items from service. Attach rigging to loads using proper choking and hitching methods. Use tag lines to control loads during crane operations. Maintain exclusion zones and barricade swing radius areas. Communicate with crane operator using standard hand signals. Position loads precisely for equipment setting and installation. Document rigging activities and maintain equipment inventory. Must have rigging experience and understand load dynamics. Schedule is 6 days per week with 10 hour shifts. Per diem provided.

Lattice Boom Crane Operator for heavy lifts in Chattanooga. Operate lattice boom crawler cranes for heavy industrial lifts. Execute critical lifts following engineered lift plans precisely. Assemble and disassemble boom sections as required for mobilization. Verify load charts for specific boom configurations and counterweight. Coordinate tandem lifts with other crane operators when required. Maintain precise load control during equipment setting operations. Work with rigging foreman on complex pick and carry operations. Ensure proper ground preparation for crane travel paths. Document all lifts and maintain thorough inspection records. Participate in pre-lift meetings and job hazard analyses. Must have lattice boom crane experience and current certifications. Schedule is 6 days per week with 10 hour shifts. Premium operator rates with full per diem.

Hydraulic Crane Operator needed in Memphis. Operate hydraulic truck cranes in tight industrial environments. Navigate congested work areas while maintaining safe operations. Execute picks in close proximity to operating equipment and structures. Verify ground conditions and use appropriate cribbing and mats. Work with rigging crews to ensure proper load attachment. Maintain situational awareness of overhead obstructions and power lines. Perform equipment inspections and preventive maintenance tasks. Document lift activities and maintain required certifications. Communicate professionally with site personnel and supervision. Respond to changing priorities while maintaining safety standards. Must have hydraulic crane experience and current NCCCO certification. Schedule is 5 days per week with 10 hour shifts. Full per diem provided.

NCCCO Crane Operator for industrial lifts in Nashville. Operate mobile cranes for industrial construction and maintenance lifts. Perform daily crane inspections and document findings. Review lift plans and verify load weights and rigging configurations. Set up crane with proper outrigger placement and ground conditions. Execute lifts per plan while maintaining communication with riggers. Monitor load chart limits and boom angle throughout operations. Ensure swing radius is clear and barricaded appropriately. Stop operations for any unsafe conditions or weather concerns. Maintain crane maintenance logs and report mechanical issues. Participate in critical lift planning meetings when required. Must hold current NCCCO certification for mobile cranes. Schedule is 6 days per week with 10 hour shifts. Operator rates with full per diem provided.

Controls Commissioning Lead for plant startup in Evansville. Lead controls commissioning activities for industrial plant startup. Coordinate system testing sequences with operations and engineering. Develop and execute functional test procedures for control systems. Troubleshoot complex control logic and interlock issues. Interface with DCS vendor on system configuration matters. Support safety system testing and SIL verification activities. Manage controls punch list and track items to completion. Review control narratives and verify correct implementation. Coordinate with instrument and electrical leads on interface issues. Report commissioning progress and issues to project management. Must have controls commissioning lead experience on major projects. Schedule is 6 days per week with 12 hour shifts. Lead rates with full per diem.

Controls Technician needed in Fort Wayne. Support industrial control system installation and commissioning. Terminate field wiring in PLC and DCS marshalling cabinets. Perform point to point checks and verify IO assignments. Troubleshoot control wiring and signal issues methodically. Assist with PLC programming changes under engineer direction. Configure VFDs, soft starters, and motor protection devices. Support functional testing of control sequences and interlocks. Verify alarm and shutdown functions operate correctly. Document test results and maintain accurate redline drawings. Work safely around energized control panels with proper PPE. Must have controls experience with PLC and DCS systems. Schedule is 5 days per week with 10 hour shifts. Per diem provided.

Instrument Lead for startup project in Indianapolis. Lead instrumentation activities during commissioning and startup phase. Coordinate loop check sequences with operations and controls teams. Troubleshoot complex instrument and control valve issues. Verify instrument configurations match data sheets and P&IDs. Support control narrative testing and interlock verification. Manage punch list items and track to completion. Interface with vendor representatives on specialized equipment. Review calibration documentation for accuracy and completeness. Coordinate with electrical and mechanical teams on system turnover. Report progress and issues to commissioning management daily. Must have instrument lead experience on startup projects. Schedule is 6 days per week with 10 hour shifts. Lead rates with full per diem.

Instrument Technician for commissioning in Toledo. Install and calibrate industrial instrumentation for process control systems. Mount transmitters, control valves, and field devices per specifications. Run instrument tubing and ensure proper support and protection. Terminate instrument cables and verify loop wiring accuracy. Calibrate pressure, temperature, level, and flow instruments. Perform loop checks and troubleshoot signal issues. Document calibration results and maintain equipment records. Configure smart instruments using HART communicators. Support control system checkout and commissioning activities. Work with DCS technicians on control loop tuning. Must have instrumentation experience in industrial environments. Schedule is 6 days per week with 10 hour shifts. Per diem provided.

Plumbing Foreman for industrial project in Cleveland. Lead plumbing crew on industrial installation projects. Plan and coordinate daily work activities and material needs. Review drawings for routing, sizing, and specification compliance. Ensure quality workmanship and code compliance on all installations. Coordinate underground work with excavation contractors. Schedule inspections and address any deficiencies promptly. Track installation progress and report quantities daily. Manage crew productivity and timekeeping activities. Enforce safety requirements and conduct toolbox talks. Interface with general contractor on scheduling and access. Must have plumbing foreman experience on industrial projects. Schedule is 5 days per week with 10 hour shifts. Foreman rates with full per diem.

Industrial Plumber needed in Columbus. Install industrial plumbing systems for manufacturing and processing facilities. Work with cast iron, copper, PVC, and stainless steel piping systems. Install sanitary drainage, storm water, and process waste systems. Maintain proper slope and support spacing per code requirements. Install fixtures, valves, and equipment connections. Perform pressure testing and leak checks on completed systems. Read plumbing drawings and coordinate with other trades. Cut, thread, and join pipe using appropriate methods for materials. Install roof drains, floor drains, and cleanouts per plan. Ensure code compliance and prepare systems for inspection. Must have industrial plumbing experience and valid license where required. Schedule is 5 days per week with 10 hour shifts. Per diem provided.

Safety Supervisor for construction project in Decatur. Supervise site safety program and lead safety team on industrial project. Develop and implement job hazard analyses for work activities. Review and approve confined space, hot work, and lift permits. Conduct incident investigations and develop corrective actions. Interface with client safety representatives on program requirements. Lead weekly safety meetings and toolbox talk programs. Audit subcontractor safety programs and documentation. Manage drug testing and medical surveillance programs. Track safety metrics and report to project management. Drive continuous improvement in safety performance. Must have safety supervisor experience on major industrial construction projects. Schedule is 6 days per week with 10 hour shifts. Supervisor rates with full per diem.

QA/QC Lead Inspector for major project in Joliet. Lead QA/QC activities and coordinate inspection team on large industrial project. Develop inspection and test plans for construction activities. Assign inspectors and ensure adequate coverage of work areas. Review and approve inspection documentation and test packages. Interface with client QA representatives on quality matters. Conduct root cause analysis on significant quality issues. Track quality metrics and report trends to management. Ensure calibration of inspection equipment is current. Audit subcontractor QC programs for compliance. Support mechanical completion and turnover activities. Must have QC lead experience on industrial projects exceeding 100 million dollars. Schedule is 5 days per week with 10 hour shifts. Lead rates with full per diem.